Gurugram, Haryana
Leading Manufacturers, Exporters, Wholesaler, Retailer of Belt Conveyor Head Pulley, Conveyor Tail Pulley, Diamond Grooving On Pulley and Snub and Bend Pulley from Gurugram.
Business Type | Manufacturer, Exporter, Supplier, Retailer |
Application | Mining Used |
Grade | Excellent |
Usage | Provide transmission of torque |
Pulley Type | Head driving drum |
Surface | Smooth steel surface with rubber lagging |
Shell Thickness | 4-8mm |
Preferred Buyer From
Location | Worldwide |
Conveyor pulleys are the main elements providing the transmission of torque from the drive and ensuring that belts remain taught. Drive pulleys/Head pulley is the main part for conveying bulk materials , which located at the discharge point of the conveyor it provides the driving force for the conveyor.
Business Type | Manufacturer, Exporter, Supplier, Retailer |
Material | Carbon Steel |
Application | Etc. |
Grade | Excellent |
Shell thickness | 4-8mm |
Length | 500-2800mm |
Welding | Submerged arc welding |
Preferred Buyer From
Location | Worldwide |
Tad pulley is located at the tail end/ Feed point of the conveyor opposite to the head tail pulley can be a drive pulley or an idler pulley.
Business Type | Manufacturer, Exporter, Supplier, Retailer |
Material | Carbon Steel |
Application | Diamond Grooving |
Grade | Excellent |
Length | 500-2800mm |
Shell thickness | 4-8mm |
Welding | Submerged arc welding |
Preferred Buyer From
Location | Worldwide |
The purpose of Diamond Grooving on Pulleys is to wrap the belt further around the drive pulley to improve the transmission of the driving force, and to eliminate belt slip. At the manufacturing level the Surface of Pulley is Smooth Diamond grooving on the pulleys can be done by Hot / Cold Vulcanization which improves the friction between the drive pulley and the belt.
Business Type | Manufacturer, Exporter, Supplier, Retailer |
Grade | Excellent |
Usage | Wrap the belt further around the drive pulley |
Specialty | Improves the transmission of the driving force |
Average Angle | 22 degree |
Shell Thickness | 4mm- 8mm |
Bearing Type | Self-aligning Ball Bearings |
Preferred Buyer From
Location | Worldwide |
The purpose of the snub pulley is to wrap the belt further around the drive pulley to improve the transmission of the driving force, and to eliminate belt slip. The average angle that the belt is wrapped around the head pulley is 220.Conveyor belt pulleys are often lagged with rubber to improve the friction between the drive pulley and the belt. A conveyor belt will always move towards the point of first contact. For this reason, to improve the alignment of the belt, the head and tail pulleys. Bend Pulley tightens the belt giving more surface contact between the belt and pulley surface and is located immediately behind the drive pulley. Bend Pulley is used on the conveyors where length of the conveyor is more than 30 Mtrs.
Hi! Simply click below and type your query.
Our experts will reply you very soon.